Operating Basics; Turning On And Off; Shutdown And Hardware Reset; Navigating On The Screen - Mio Moov 200 Series User Manual

Operating basics

Turning on and off

For normal operation, turn off your Mio by sliding the power switch to the OFF position. Your Mio enters a
suspended state. To use it again, slide the power switch to the ON position. Your Mio will be back to where you
left off.
Moov 200-Series

Shutdown and hardware reset

Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be
"frozen" or "locked-up."
You can perform a hardware reset by shutting down your Mio and then turning it back on. To shut down your
Mio, slide the power switch to the RESET position. To turn on your Mio after shutting it down, slide the power
switch to the ON position.

Navigating on the screen

To operate your Mio, touch the screen with your fingertip. You can perform the following actions:
Moov 200-Series
Tap
Touch the screen once with your fingertip to open items or select onscreen buttons or options.
Drag
Hold your fingertip on the screen and drag up/down/left/right or across the screen. (This is not supported
by all applications.)
Tap and hold
Tap and hold your fingertip until an action is complete, or a result or menu is shown. (This is not supported
by all applications.)
Moov 300-Series
Moov 300-Series
9