Kidde i9060CA User Manual page 15

Maintenance
NOTE: WEEKLY TESTING IS REQUIRED!
Cleaning the Alarm
The alarm should be cleaned at least once a year.
• To clean your alarm, remove it from the mounting plate as
outlined in previous sections. You can clean the alarm by using
compressed air or a vacuum cleaner hose with a soft brush
attachment. Blow or vacuum around the perimeter of the
alarm to remove dust and dirt. The outside of the alarm can
be wiped with a damp cloth (do not use a wet cloth to avoid
water entering the unit).
• After cleaning, reinstall your alarm and test your alarm by
using the Test button. If cleaning does not restore the alarm to
normal operation, the alarm should be replaced.
• Do not paint the unit. Paint will seal the vents and interfere
with the sensor's ability to detect smoke. Never attempt to
disassemble the unit or clean inside. This action will void your
warranty.
Replacing the Alarm
The National Fire Protection Association (NFPA) and Kidde
recommend replacing this alarm ten years from the date code
label (located on the back of the alarm).
14