Overdub On Tracks 2 And 3; Switchboard Echoplex Looper Footswitch Summary - Gibson Firebird X Owner's Manual

Overdub on Tracks 2 and 3

You can record new sounds into what you've already recorded onto Tracks 2 or 3; this mixes
the new sounds with the previously-recorded ones ("sound-on-sound" recording).
1. To overdub, start playing the loop.
2. To overdub on Track 2, double-click footswitch 5--B.
3. To overdub on Track 3, double-click footswitch 6--Mute.
4. When you initiate overdubbing on either Track 2 or 3, recording begins immediately and
stops when the loop ends. To stop overdubbing on a track at any time, press the
corresponding track's Play or Stop footswitch.
Note: You can do unlimited overdubs.

Switchboard Echoplex Looper Footswitch Summary

Footswitch 1--7
Press once: Play Track 1
Double-click: Record Track 1 and delete Tracks 2 and 3
Footswitch 4--A
Press once: Stop Track 1
Double-click: Stop all tracks
Footswitch 2--8
Press once: Play Track 2
Double-click: Record Track 2
Footswitch 5--B
Press once: Stop Track 2
Double-click: Overdub Track 2
Footswitch 3--9
Press once: Play Track 3
Double-click: Record Track 3
Footswitch 6--Mute
Press once: Stop Track 3
Double-click: Overdub Track 3
Page 26