Page 24
Use high quality strings. Install your strings correctly.
Page 25
What gauge strings should be used? What brand of strings should be used?
Page 27
Caution: Do not attempt to manually turn the Robot Tuners unless they are pulled away from the peghead so they are in the disengaged position! Otherwise the Robot Tuners can be damaged.
Page 28
During the tuning process, the guitar will be nearly 100 percent muted. After the MCK is pushed back in, full volume returns.
Page 32
Function MCK Position Display LEDs Action Remarks...
Page 33
Function MCK Position Display LEDs Action Remarks...
Page 34
Function MCK Position Display LEDs Action Remarks...
Page 35
Function Display LEDs Action Remarks MCK Position...
Page 36
Function Display LEDs Action Remarks MCK Position...
Page 37
Function MCK Position Display LEDs Action Remarks...
Page 39
(When all strings are removed, don’t allow the tailpiece to move or it could damage its connector!)
Page 40
Function MCK Position Display LEDs Action Remarks...
Page 41
Function MCK Position Display LEDs Action Remarks...
Page 42
Function Display LEDs Action Remarks MCK Position...
Page 44
Function MCK Position Display LEDs Action Remarks...
Page 45
Function MCK Position Display LEDs Action Remarks...
Page 46
Function MCK Position Display LEDs Action Remarks...
Page 47
Function MCK Position Display LEDs Action Remarks...
Page 48
Function MCK Position Display LEDs Action Remarks...
Page 49
Function Display LEDs Action Remarks MCK Position...
Page 50
Function MCK Position Display LEDs Action Remarks...
Page 53
Function MCK Position Display LEDs Action Remarks...
Page 55
Note: It is recommended not to store the guitar with the MCK out, as this will fully drain the battery eventually and Emergency Charge Mode must be employed.