Channel Group Selection - Vertex Standard VX-530 Series Operating Manual

VX-530 S O M
A O

Channel Group Selection

The VX-530 is capable of separating its 512 memory channels into any of
16 Groups. There is no limit as to the number of channels which may be
assigned to each Group. The Dealer will have made the Group assignment
at the time of channel programming. At the same time, one of the Soft
Keys will be assigned as the Channel Group Selection key.
To change Channel Groups, press the assigned Soft key to step through
the available Groups. Once the desired Group is reached, rotate the CH
selector knob to select the desired channel within the selected Group.
You may wish to have the Scanner (described previously) pass through
more than one Group during the scanning process (normally, scanning is
performed within the current group only). To include the current Group in
the scanning loop, press and hold in the assigned Soft key for one second.
To remove a Group from Group Scan, press and hold in the assigned Soft
key again for one second.
Multi-Group Scanning is only possible if you are using the "User Scan" list.
The VX-530 has two scanning "lists:" the "Dealer Scan" list and the "User
Scan" list. The "Dealer Scan" list is a fixed group of stations which will be
included when scanning is activated. The "User Scan" list is a different list,
initially arranged by the Dealer, which may be modified by the User (if, for
example, you want to delete one or more of these channels from the scan-
ning list).
To edit the User Scan list, press and hold in the Soft key (assigned to the
Group Up/Down function) to delete the current Memory Group from the
Scanning. Alternatively, press and hold in the "Scan" Soft key for one
second to delete the Current Memory channel from the Scanning loop.
When you delete a Group or channel, "-SKIP-" will appear on the LCD for
one second after pressing the Soft key. To restore a particular channel to your
scanning list, press and hold in the Soft key again for one second;
"-STOP-" will appear on the LCD for one second after pressing the Soft key.
Page 16
Vertex Standard Co., Ltd.