Page 1
User Guide 0-15Kg (0-4 yrs) Visio 1407.001 - VISIO AX118 User Guide.indd 1 22/6/07 15:22:47...
Page 2
If using an alternative harness affects the stability of the pushchair. an adverse effect on manoeuvrability and conforming to BS6684, ‘D’ ring attachments steering. 1407.001 - VISIO AX118 User Guide.indd 2-3 22/6/07 15:22:47...
Page 4
Raise the calf support by lifting it until the release latches lock into place Thread the rear press stud straps around (dia 8b). the rear legs and above the frame, press studs together (dia 4b). 1407.001 - VISIO AX118 User Guide.indd 6-7 22/6/07 15:22:53...
Page 5
Hold pushchair vertically and push down on the handles until the latches lock on both sides (you will hear a click) (dia 11c). (dia 12h). 1407.001 - VISIO AX118 User Guide.indd 8-9 22/6/07 15:22:56...
Page 6
It may be necessary to remove the adaptors from the child seat when installing it in your vehicle. If the adaptors are in contact with the vehicle seat cushion, remove them. 1407.001 - VISIO AX118 User Guide.indd 10-11 22/6/07 15:22:57...
Page 7
– Fasten the harness when not in use to prevent it becoming trapped when folding the pushchair. “D” rings are provided at each side of the seat for attachment of an alternative harness. 1407.001 - VISIO AX118 User Guide.indd 12-13 22/6/07 15:22:59...
Page 8
To refit all the covers, simply reverse the above instructions. Removing the canopy hood Pull the hood clips off the bars located just above the armrest (dia 15e). 1407.001 - VISIO AX118 User Guide.indd 14-15 22/6/07 15:23:02...
Page 9
Britax Excelsior Limited 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom Tel: 01264 386034 www.britax.eu Britax is a registered trademark of Britax Childcare AZ0-048 1407.001 - VISIO AX118 User Guide.indd 16 22/6/07 15:23:02...