Adjusting the Projection Screen
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Focus adjustment
Turn the focus ring to adjust the focus.
Projection image position adjustment (Lens shift)
If the projector cannot be set up directly in
front of the screen, you can use the lens
shift function to move the position of the
projected images vertically or horizontally
within the range shown at right. While
turning the lens shift dials, the position
where a click is heard is currently at about
the middle of the shift range.
The image position cannot be moved to the
maximum vertical values and maximum
horizontal values at the same time.
Ex) The image cannot be shifted
vertically when it has been shifted
horizontally by the full amount.
When the image has been shifted
vertically by the full amount, it can
be shifted up to 9% of the horizontal
width of the screen.
Standard projection position
(center position for lens shift)
Range that the picture can be shifted
from the standard projection position
16
Projection size adjustment (Zoom adjustment)
Turn the zoom ring to adjust the size of the projected image.
Focus adjustment
Projection size adjustment (Zoom
adjustment)
Projection image position adjustment
(Lens shift)
When transporting the
projector, make sure to turn the
lens position down by the full
amount. Otherwise the lens
shift mechanism may be
damaged.
H
1/2V
1/2V
1/2H
1/2H
Move
downwards
Move to
the left
Move
upwards
Wide
Tele
V
Move to
the right