Control Panel Lock; Trigger Out; High Altitude Mode; Projection - Epson Dreamio EH-TW3600 User Manual

Configuration Menu Functions

Control Panel Lock

If this is set to "On", you can't operate the projector's control panel buttons and a
screen when a button is pressed. To cancel, press and hold
seven seconds or more.
If you change the setting, the new setting will take effect after exiting the configuration menu.

Trigger Out

This turns the trigger function on and off to determine whether the projector's power on/off status is
communicated to an external device.
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.

High Altitude Mode

A fan is set at a certain speed of rotation so as to bring down internal temperature.
When using above an altitude of about 1500m, set to "On".

Projection

This should be set in accordance with the method used to set up the projector.
• Front
• Front/Ceiling : Select when the projector is set up in front of the screen and suspended from a ceiling.
• Rear
• Rear/Ceiling : Select when the projector is set up behind the screen and suspended from a ceiling.

Illumination

If the light from
turn this setting to "Off".

Display

Menu Position
Press
Menu Color
Selects the color for the main configuration menu.
• Color 1:Black
• Color 2:Blue
Messages
This sets whether the following message displays appear (On) or don't appear (Off).
• Image signal, color mode, aspect and item name when memory settings are retrieved.
• Messages such as when no image signals are being input, when an incompatible signal is input, and
when the internal temperature rises.
Display Background
Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.
Startup Screen
This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On)
or not displayed (Off).
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
Standby Confirmation
Sets whether the standby confirmation message is displayed (On) or not displayed (Off).
34
: Select when the projector is set up in front of the screen.
: Select when the projector is set up behind the screen.
or becomes bothersome while watching a movie or the like in a dark room,
, , and to specify the position for the menus to be displayed.
icon appears on the
on the projector's control panel for about