Selecting Channels Directly; Channel Presets (Band) - Sirius Satellite Radio starmate 3 User Manual

Satellite radio plug & play
Hide thumbs Also See for starmate 3:
Table of Contents

Advertisement

Selecting Channels Directly

A channel may be directly selected by entering the channel number using the 0 - 9 buttons on
the radio. To enter a channel number, momentarily press and release the Select button. At the
display prompt (Figure 6) enter the three digit channel number.

Channel Presets (BAND)

You can store up to 30 of your favorite channels as presets for quick recall access. The
preset channels are stored in 3 bands, A, B, and C, each containing 10 channel presets, and
are numbered 0 to 9. The 10 channel presets in each band are accessed by pressing the
appropriate number (0 to 9) on the radio. A momentary press and release of the BAND button
cycles through the 3 preset bands (A, B, and C).
Storing Channel Presets
To store a favorite channel as a preset, do the following:
Momentarily press and release the BAND button until the desired preset band, A, B, or
1.
C, is displayed in the lower right corner of the default display screen.
2.
Tune the radio to the channel you wish to store as a preset. (Refer to the section
Changing Channels for specific instructions for tuning to a channel.)
3.
Press and hold the numbered preset button in which you wish to store your favorite
channel for 1½ seconds until you hear a beep. The band and preset number will then be
displayed in the lower right corner of the display screen to confirm that the channel has
been stored. (Figure 7)
[
]

Operation
001
Channel Name
Artist N
Artist N
Enter Channel
# ___
Category 12:00P
figure 6
figure 6
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Starmate 4

Table of Contents