Table of Contents
Advertisement
Changing Channels and Categories
Pressing the Channel UP or DOWN button will cause the Stratus 4 to immediately tune to the
next or previous channel.
Pressing the Category < or > button once will display a list of the channels in the current category,
highlighting the currently-tuned channel (see Figure 38). Use the Channel UP/DOWN buttons
to navigate through the list, and press the Select button to choose a selected channel. Press
the Category < or > buttons to scroll through all the different categories (see Figure 38).
Selecting Channels Directly
You can directly tune to any channel by entering its channel number. Momentarily press and
release the Select button. At the display prompt (Figure 39), use the Preset/Direct tune (0 – 9)
buttons to enter the channel's three-digit number.
[
]
52
Operation
Figure 38
Figure 39
Advertisement
Table of Contents
