Table of Contents
Advertisement
RESTARTING A VISUALIZATION CLUSTER
Similar to configuration a cluster should be re-started in a particular order to minimize
the synchronization time:
Start all the client machines
1.
Once all client machines are stable start the Timing Master
2.
Depending on the configuration it can take many minutes for a cluster to fully
synchronize.
WINDOWS DRIVER CONFIGURATION
Before configuring any of the synchronization modes verify in the NVIDIA Control
Panel that the Vertical Sync setting is on and if using stereo that the correct Stereo
display mode is selected and enabled. For best performance in a cluster it is
recommended that you select the Workstation App – Dynamic Streaming driver preset
as well.
Open the NVIDIA Control Panel and select Manage 3D Settings
1.
Select Workstation App-Dynamic Streaming as the Global Preset
2.
Quadro Sync
Frame Lock Configuration
DU-06574-001_v01 | 11
Advertisement
Table of Contents
