Security Settings - Nokia 3510 User Manual

M e n u f u n c t i o n s
• Select Default profile
the profile you want to
automatically activate when you
connect the selected accessory.
You can select another profile
while the accessory is connected.
• Select Automatic answer
the phone to automatically
answer an incoming call after
five seconds. If the
alert is set to Beep once
automatic answer will not be
used.
• Select Lights to set the lights
permanently on, On. Select
Automatic to switch the lights
on for 15 seconds after a
keypress. The Lights
only available when
selected.
• Select Use loopset
loopset instead of the
headset,Yes. Use loopset
available only when
selected.

Security settings

Note: When security
features, which restrict
calls, are in use (call barring,
closed user group and fixed
dialling), calls may be
possible to certain
emergency numbers in
some networks (e.g. 112 or
other official emergency
number).
36
to select
to set
Incoming call
or Off,
option is
Handsfree is
to use the
is
Loopset is
Press Menu, select
Security settings. Select
• PIN code request
phone to ask for your PIN code
every time the phone is switched
on. Some SIM cards do not allow
the PIN code request to be turned
off.
• Call barring service
service) to restrict incoming calls
to and outgoing calls from your
phone. A barring password is
required.
• Fixed dialling to restrict your
outgoing calls to selected phone
numbers, if this function is
supported by your SIM card. The
PIN2 code is required.
• Closed user group. Closed user
group is a network service that
specifies the group of people
whom you can call and who can
call you. For more information
contact your network operator or
service provider.
• Security level. Select
the phone will ask for the
security code whenever a new
SIM card is inserted into the
phone.
Settings and
to set the
(network
Phone and