Gprs; Sending And Receiving Data Via - Nokia 6650 User Manual

M e n u f u n c t i o n s

Sending and receiving data via

infrared
• Ensure that the infrared ports of
your phone and the other device
are pointing at each other and
that there are no obstructions
between the devices. The
preferable distance between the
two devices in an infrared
connection is one meter at the
most.
• To receive data, activate the
infrared port by accessing this
menu.
• To send data from your phone,
select the function from which
you want to send data over the
infrared connection.
If data transfer is not started within
two minutes after the activation of
the infrared port, the connection is
cancelled and has to be started
again.
Checking the status of the
infrared connection
When is shown continuously,
the infrared connection is active and
your phone is ready to send or
receive data via its infrared port.
When blinks, your phone is
trying to connect to the other device
or the connection has been lost.
50 Copyright © 2004 Nokia. All rights reserved.

GPRS

In this menu, you can define the
GPRS settings for using the phone as
a modem with a PC (network service
dependent).
To access this menu: Press
standby mode, and select
Connectivity and GPRS.
GPRS indicators
When the GPRS connection is active,
is shown on the display. If the
GPRS connection is suspended, for
example because you make or
receive a call during the connection,
is shown on the display (in GSM
networks only).
GPRS modem settings
You can use the phone as a modem
for GPRS connections when the
phone is connected to a compatible
PC via an infrared, Bluetooth or
cable connection (network service
dependent).
To define the settings for GPRS
connections from your PC: In the
GPRS menu, select
settings and Active access point
Edit active access
• Active access point
an access point. Scroll to the
access point you want to use and
press Activate. An access point is
a server that your phone contacts
for an Internet connection.
Menu in
GPRS modem
or
point. Select
to activate