General Information; Access Codes - Nokia 6650 User Manual

General information

■ Access codes

• Security code: This code is
supplied with your phone. The
security code protects your
phone against unauthorised use.
The preset code is 12345.
Change the code and set the
phone to request it using the
Change of access codes
Security level
Security settings
new code secret and in a safe
place separate from your phone.
• PIN code: The PIN (Personal
Identification Number) code may
be supplied with the SIM card. It
protects the SIM card against
unauthorised use. If you activate
the PIN code request
the Security settings
code is requested each time the
phone is switched on.
If you enter an incorrect PIN code
three times in succession, the
SIM card is blocked. Key in the
PUK code and press OK. Key in a
new PIN code and press OK. Key
in the new code again and press
OK.
xii
and
functions in the
menu. Keep the
function in
menu, the
Copyright © 2004 Nokia. All rights reserved.
• PIN2 code: This code may be
supplied with the SIM card and is
required to access some
functions, such as charging unit
counters.
• PUK and PUK2 codes: These
codes may be supplied with the
SIM card. If this is not the case,
contact your service provider.
• Barring password: This code is
needed when using the
barring service
Security settings
• Module PIN and signing PIN:
The module PIN is needed to
access the information in the
security module, see page 56. The
signing PIN is needed for the
digital signature, see page 57.
The module PIN and the signing
PIN may be supplied with the SIM
card if the card contains a
security module.
• Wallet code: The wallet code is
needed to use the wallet services,
see page 42.
Call
function in the
menu.