Technical Specifications - 1.6L Duratec-16V Ti-Vct (Sigma) - Ford FIESTA Owner's Manual

Name
Motorcraft® DOT 4 LV High Performance Motor Vehicle
Brake Fluid
PM-20
Motorcraft® Multi-Purpose Grease Spray
XL-5
Use oil and fluids that meet the defined
specification and viscosity grades.
Note: If you unable to find an engine oil that
meets the specification defined, you must
use an SAE 5W-30 engine oil defined by
ACEA A5/B5 for top-up only.
TECHNICAL SPECIFICATIONS - 1.6L DURATEC-16V TI-VCT
(SIGMA)
Capacities
Engine cooling system
Engine lubrication system - including the oil filter
Engine lubrication system - excluding the oil filter
Engine oil top-up - raise the level on the dipstick
from minimum to maximum
Fuel tank
Automatic transmission
Manual transmission
Windshield and rear window washer system -
including headlamp washer
Fiesta (CCT) Vehicles Built From: 11-10-2013, Vehicles Built Up To: 31-12-2013
Maintenance
Item
202
Specification
WSS-M6C65-A2
ESB-M1C93-B
If you use oil and fluids that do not meet
the defined specification and viscosity
grades this may lead to:
• component damage which may not be
covered by the vehicle Warranty.
• longer engine cranking periods.
• increased emission levels.
• reduced engine performance.
• reduced fuel economy.
6.1 qt (5.8 L)
4.3 qt (4.1 L)
4 qt (3.8 L)
0.8 qt (0.75 L)
12.4 gal (47 L)
1.8 qt (1.7 L)
2.2 qt (2.1 L)
2.6 qt (2.5 L)
Capacity