Technical Specifications - 1.6L Ecoboost - Ford FIESTA Owner's Manual

Use oil and fluids that meet the defined
specification and viscosity grades.
Note: If you unable to find an engine oil that
meets the specification defined by
WSS-M2C913-D, you must use an SAE
5W-30 engine oil defined by ACEA A5/B5
for top-up only.

TECHNICAL SPECIFICATIONS - 1.6L ECOBOOST

Capacities
Engine cooling system
Engine lubrication system - including the oil filter
Engine lubrication system - excluding the oil filter
Engine oil top-up - raise the level on the dipstick
from minimum to maximum
Fuel tank
Automatic transmission
Windshield and rear window washer system -
including headlamp washer
Specifications
Materials
Name
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor
Oil or Motorcraft® SAE 5W-20 Full Synthetic Motor Oil
XO-5W20-QSP, XO-5W20-QFS
Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC
Motorcraft® Full Synthetic Manual Transmission Fluid
XT-M5-QS
Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B
Fiesta (CCT) Vehicles Built From: 11-10-2013, Vehicles Built Up To: 31-12-2013
Maintenance
Item
201
If you use oil and fluids that do not meet
the defined specification and viscosity
grades this may lead to:
• component damage which may not be
covered by the vehicle Warranty.
• longer engine cranking periods.
• increased emission levels.
• reduced engine performance.
• reduced fuel economy.
6.1 qt (5.8 L)
4.3 qt (4.1 L)
4 qt (3.8 L)
0.8 qt (0.75 L)
12.4 gal (47 L)
1.8 qt (1.7 L)
2.6 qt (2.5 L)
Specification
WSS-M2C945-A
WSS-M2C200-D2
WSD-M2C200-C
WSS-M97B44-D2
Capacity