Front Fog Lamps; Setting The System Sensitivity; Manually Overriding The System - Ford TRANSIT CUSTOM Owner's Manual

Note: The indicator will only illuminate
when it is dark and headlamps have been
switched on.
Note: The system may take a short time to
initialise after first switching the ignition on,
especially in very dark conditions. The main
beam will not automatically switch on
during this time.

Setting the System Sensitivity

The system has three sensitivity levels
which can be accessed via the information
display. See Information Displays (page
56).
The set level determines the speed at
which the main beam will be restored after
detected traffic leaves the field of view.

Manually Overriding the System

Push or pull the lever to switch between
main and dipped beam.
Note: This is a temporary override and the
system will return to automatic operation
after a short period.
To permanently deactivate the system use
the information display menu or turn the
lighting control switch from autolamps to
headlamps.
Transit Custom (TTF) Vehicles Built From: 14-01-2013
Lighting

FRONT FOG LAMPS

Only use the front fog lamps when
visibility is considerably restricted by
fog, snow or rain.
Note: If you switch autolamps on, you can
only switch the front fog lamps on once
autolamps has switched the headlamps on.
Press the control to switch the fog lamps
on or off.
You can switch the fog lamps on when the
lighting control is in any position except
off.
44
WARNING