Ford TRANSIT CUSTOM Owner's Manual page 204

When You Select
Assistance options
Personal data
Reset all settings
Route Displays
Map Display
Press MAP to view map mode. This view
will show your current location with your
vehicle in the center shown as an arrow
surrounded by a circle. The arrow will face
in the direction of travel.
The information on the top line gives the
name of the current road, or the next road
to take if a turn is approaching.
You can change the way the map is
displayed by altering the zoom and
orientation settings. Press the relevant
function buttons to change the map scale
and using the left and right arrow buttons
zoom in or out. The current map scale is
shown on the display.
Map scale settings may be set between
0.05 miles to 500 miles or 50 metres to
500 kilometres, with an auto setting to the
far left. The auto setting continuously
changes the map scale according to the
road type being driven.
Junction Zoom
This feature will automatically increase
the zoom on the map display at times
when you are required to make a turn, or
perform more complex manoeuvers.
Shortly after the zoom scale will return to
the previous level.
Select the auto option to turn on junction
zoom.
Transit Custom (TTF) Vehicles Built From: 14-01-2013
Navigation
Customise display information for your journey (for
example signs, lanes and speed limits).
Edit and delete personal data (for example your home
address).
Reset the navigation settings.
Navigation Display
After commencing a navigation route, the
default screen is the main navigation
screen.
Once an active route is underway, guidance
will be given by on-screen information and
voice prompts. Whichever audio source
you wish to leave the unit in, basic turn by
turn and distance information will remain
on the screen in the form of a graphic inset.
You do not need to leave the unit on the
main navigation screen when you are
navigating a route. Press MAP at any time
to return to the main navigation screen.
Slightly more detailed information on your
route may be available via the main
navigation screen if required.
Hazard Spot Warning
The system supports a hazard spot
warning feature which informs you with
visible and audible feedback about
hazardous traffic areas. The system does
not automatically turn on every time you
switch the ignition on. You can switch the
system on and off using the information
display. See Information Displays (page
56).
Navigation Map Updates
Annual navigation map updates are
available for purchase through an
authorised dealer. You need to specify the
make and model of your vehicle to
determine if there is an update available.
202
You Can