TRIP COMPUTER
Distance to empty
Indicates the approximate distance the
vehicle will travel on the fuel remaining in
the tank. Changes in driving pattern may
cause the value to vary.
Instantaneous fuel consumption
Indicates the current average fuel
consumption.
Average fuel consumption
Indicates the average fuel consumption
since the function was last reset.
Trip Odometer
Registers the mileage of individual
journeys.
Digital Speedometer
The speed your vehicle is traveling at will
display as a digital number.
Average speed
Indicates the average speed calculated
since the function was last reset.
Outside air temperature
Shows the outside air temperature.
Odometer
Registers the total mileage of the vehicle.
Resetting the trip computer
To reset a particular display:
1.
Highlight Trip Computer with the up
and down arrow buttons and press the
right arrow button.
2. Highlight the function to be reset.
3. Hold the OK button pressed.
Focus (CB8) Vehicles Built From: 26-08-2013, Vehicles Built Up To: 31-12-2013
Information Displays
85
PERSONALIZED SETTINGS
Language setting
A choice of 13 languages are available:
English, German, Italian, French, Spanish,
Russian, Dutch, Polish, Swedish,
Portuguese, Czech, Danish and Norwegian.
Measure units
To toggle between metric and imperial
units, scroll to this display and press the
OK button.
Toggling the units of measure using this
display will affect the following displays:
•
Distance to empty.
•
Average fuel consumption.
•
Instantaneous fuel consumption.
•
Average speed.
Temperature units
To toggle between metric and imperial
units, scroll to this display and press the
OK button.
Toggling the temperature units using this
display will affect the following displays:
•
Outside air temperature.
•
The temperature display in the
automatic climate control.
Chime deactivation
The following chimes can be deactivated:
•
Warning messages.
•
Information messages.