Global Opening And Closing; Global Closing - Ford FOCUS Owner's Manual

To enable all your passive keys, unlock the
vehicle using a passive key or the remote
control unlocking function.
All passive keys will then be enabled if the
ignition is turned on or the vehicle is started
using a valid key.
Locking and unlocking the doors
with the key blade
1. Carefully remove the cover.
2. Remove the key blade and insert it into
the lock.
Note: Only the driver's door handle is fitted
with a lock cylinder.
GLOBAL OPENING AND
CLOSING
You can also operate the power windows
with the ignition off via the global opening
and global closing function.
Note: Global opening will only operate for
a short period of time after you have
unlocked your vehicle using the remote
control.
Note: Global closing will only operate if you
have set the memory correctly for each
window. See Power Windows (page 66).
Focus (CB8) Vehicles Built From: 26-08-2013, Vehicles Built Up To: 31-12-2013
Locks
Global opening
To open all the windows, press and hold
the remote control unlock button for at
least three seconds. Press the lock or
unlock button to stop the opening function.

Global closing

Vehicles without keyless entry
Take care when using global closing.
In an emergency, press the lock or
unlock button immediately to stop.
37
WARNING