Product Specifications - Gigabyte GA-F2A78M-HD2 User Manual

1-2 Product Specifications
FM2+ Socket:
Š
APU
-
-
(Go to GIGABYTE's website for the latest APU support list.)
Chipset AMD A78
Š
Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
Š
Dual channel memory architecture
Š
Support for DDR3 2133/1866/1600/1333 MHz memory modules
Š
Support for AMD Memory Profile (AMP)/Extreme Memory Profile (XMP)
Š
memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and
memory modules.)
Onboard Integrated Graphics Processor:
Š
Graphics -
-
-
-
Audio Realtek
Š
High Definition Audio
Š
2/4/5.1/7.1-channel
Š
Support for S/PDIF Out
Š
LAN Realtek
Š
Expansion Slots Š 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
1 x PCI Express x1 slot
Š
(The PCI Express x1 slot conforms to PCI Express 2.0 standard.)
1 x PCI slot
Š
Multi-Graphics Support for AMD Dual Graphics technology
Š
Technology Support for AMD Eyefinity technology
Š
Storage Interface Š Chipset:
-
-
AMD A series processors
AMD Athlon series processors
™
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of
physical memory is installed, the actual memory size displayed will be less than the
size of the physical memory installed.
* The maximum 64 GB of system memory can be supported using 16 GB (or above)
memory modules. GIGABYTE will update the memory support list on the official
website when the memory modules are available on the market.
1 x D-Sub port, supporting a maximum resolution of 1920x1200
1 x DVI-D port, supporting a maximum resolution of 2560x1600
* Support for 2560x1600 resolution requires both a monitor and cable that support
Dual Link DVI.
* The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 4096x2160
* The resolution of 4096x2160 can be supported when using an FM2+ APU; the
maximum resolution supported is 1920x1200 when using an FM2 APU.
* Support for HDMI 1.4a version.
Maximum shared memory of 2 GB
ALC887 codec
®
* To configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
GbE LAN chip (10/100/1000 Mbit)
®
* To support PCI Express 3.0, you must install an FM2+ APU.
4 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 10, and JBOD
- 7 -