Integrated Graphics - Gigabyte GA-F2A78M-HD2 User Manual

` GFX Configuration
& Primary Video Device
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGD Video Sets the onboard graphics as the first display.
NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
North Bridge as the first display. (Default)
& Integrated Graphics
Enables or disables the onboard graphics function.
The BIOS will automatically enable or disable the onboard graphics depending on
Auto
the graphics card being installed. (Default)
Disables the onboard graphics.
Disabled
Always activates the onboard graphics, whether or not a PCI Express card is
Force
installed.
& UMA Frame Buffer Size
This item is configurable only when Integrated Graphics is set to Force. Frame buffer size is the total
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
use only this memory for display. Options are: Auto (default), 256M, 512M, 1G, 2G.
& OnChip SATA Channel
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Native IDE Configures the SATA controller to IDE mode.
Enables RAID for the SATA controller.
RAID
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
AHCI
(AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
(Default)
& PORT0 SATA Hot Plug~PORT3 SATA Hot Plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& SATA Power on PORT0~SATA Power on PORT3
Enables or disables each SATA port. (Default: Enabled)
` Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port.
& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
- 27 -