Mackie Digital 8 Bus Owner's Manual page 182

SETUP
SAVE SAVE AS...
GROUP
GENERAL
D8B
56 INPUT / 72 CHANNEL DIGITAL MIXER
G r p 1
< < G R O U P S > >
NEW LOAD
PLUG INS DIGITAL I/O
P r e s s C h . S e l e c t
E x i t
TO ASSIGN CHANNELS TO VIRTUAL
GROUPS
From the console:
1. Press the GROUP button in the
Session Setup Section of the console.
The Group menu appears in the Fat
Channel Display. Also, the Fader Bank
select buttons automatically revert to
Fader Bank 4.
2. Press the SELECT buttons below the
arrows to choose the Group number
you want to modify. It's also possible to
pick the group master by using the
SELECT button on one of the first 8
channels of Fader Bank 4.
3. Using the Fader Bank select switches,
(MIC/LINE, TAPE, EFFECTS,
MASTERS) choose the fader deck with
the channels that will be included in
the group.
4. Press the SELECT buttons on the
channels you want to assign to the
Virtual Group. Their inclusion in the
group will be indicated by the channel
SELECT LEDs being lit.
Note: You can assign channels from
different fader banks to the same Virtual
Group, but you can't assign a channel to
more than one group.
5. Repeat steps 2 through 4 until all
desired channels are assigned to all
desired Virtual Groups.
6. When assignments are complete, press
the SELECT button below "Exit" in the
Fat Channel Display to leave group
assignment mode.
Advanced Techniques
8-5