Mackie 1642VLZ4 Owner's Manual page 7

Stereo Guitar Effects
Stereo Guitar Effects
Stereo Compressor
DLM8 loudspeakers
DLM12S subwoofers
The rhythm and lead guitars play through stereo effects processors plugged into the line inputs
of channels 1 and 2. Microphones are connected to the mic inputs of channels 3-10 with a vocal
compressor connected to the channel 3-4 insert jacks. [Drums are mic'd on channels 5-10].
A bass guitar is connected to the line input of channel 15, while a synth is connected to the stereo
line inputs of channels 15-16.
A stereo compressor and stereo graphic EQ are connected to the L/R main inserts. The XLR L/R main
outs connect to a stereo graphic EQ before connecting to a pair of DLM12S powered subwoofers which
are connected to a pair of DLM8 powered loudspeakers to please your audience.
Digital reverb and delay processors are connected to aux sends 1 and 2, with the aux sends set to
post-level. Effects are added to the main mix via the stereo return inputs, and adjusted with the stereo
return level control. Aux sends 3 and 4 are connected to DLM8 powered loudspeakers, used as stage
monitors to please the band.
The RCA tape inputs and outputs are connected to a laptop. It's an easy way to get a stereo recording
of the live show for posterity and crank your featured playlist over the PA between bands.
Vocal
mics Drum microphones
Stereo EQ
Live Stereo PA System
Synth
Stereo Compressor
and Stereo EQ
Laptop
Headphones
Digital Reverb
Digital Delay
DLM8 Stage Monitors
Owner's Manual
7