Restarting The Computer - Toshiba Satellite L850D Series User Manual

2.
Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1.
2.
3.
4.
5.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the Hard Disk Drive.
After you turn off the computer, and the content of memory has been saved
to the Hard Disk Drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

Restarting the computer

Certain conditions require that you reset the computer, for example if:
If you need to restart the computer, there are three ways this can be
achieved:
User's Manual
Point to the arrow icon (
the menu.
Click Start and click the Control Panel.
Click System and Security and click Power Options.
Click Choose what the power buttons do or Choose what closing
the lid does.
Enable the desired Hibernation Mode settings for When I press the
power button and When I close the lid.
Click the Save changes button.
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
Click Start. Point to the arrow icon (
Restart from the menu.
Press CTRL, ALT and DEL simultaneously (once) to display the menu
window, and then select Restart from the Shut down options.
Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds
before turning the power on again by pressing the power button.
) and then select Hibernate from
) and then select
1-10