Dell PowerEdge T620 Technical Manual page 36

Table 22 lists the rack type supported by the T620 rails. The T620 does not support mounting in a
2-post rack.
Rail
System
identifier
T620 C2
For detailed information about static and sliding rails, see the Rack rail specifications section in
Appendix A. For more information on installing the T620 in a rack, see the
Instructions
on Support.Dell.com/Manuals.
The optional CMA organizes and secures the cords and cables exiting the back of the server and
unfolds to allow the server to extend out of the rack without having to detach the cables. Some key
features of the T620 CMA include:
 Large U-shaped baskets to support dense cable loads
Open vent pattern for optimal airflow

Ability to be mounted on either side

Use of hook-and-loop straps rather than plastic tie wraps to eliminate the risk of cable damage

during cycling
Low-profile fixed tray to both support and retain the CMA in its fully closed position

Ability to mount the CMA and tray without the use of tools, due to snap-in designs

Mounting interface
ReadyRails II
Rack types supported
Rail
4-post
type
Square Round
 
Sliding
2-post
Thread Flush Center
 X X
Rack Installation