Listen To Radio; Tune To A Radio Station; Program Radio Stations; Select A Preset Radio Station - Philips DC295 User Manual

5 Listen to radio

Note
•
Only FM radio reception is available on this unit.

Tune to a radio station

Tip
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
•
[STEREO] is default setting for tuner mode.
•
Under tuner mode, you can press OK repeatedly to
toggle between [STEREO] and [MONO], and the unit
memorizes your setting even if you turn off the unit or
turn to other sources.
1
Press SOURCE repeatedly to select FM
mode.
2
Press and hold TUNING +/TUNING - for
more than 3 seconds.
» The radio tunes to next station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
TUNING +/TUNING - repeatedly
until you find optimal reception.

Program radio stations

Radio station preset allows you to save radio
stations, and quickly tune to a favorite station.
Note
•
The preset list can store up to 20 stations.
•
If the preset list is fully occupied, the screen will show
PR 20.
•
If saving a radio station to a position that has already
been occupied, the original radio station will be
replaced.
11 EN
Program radio stations manually
1
Press SOURCE repeatedly to enter the
FM mode.
2
Press TUNING +/TUNING - to tune to a
radio station.
3
Press PROG/SCAN .
» A preset list position number flashes.
4
Press OK to save current radio station to
the selected position.
Tip
•
Press PRESET +/PRESET - to change the position to
save a radio station.
Program radio stations automatically
1
Press SOURCE repeatedly to enter the
FM mode.
2
Press and hold PROG/SCAN for at least
3 seconds.
» The screen displays [AUTO] (auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
3
Wait until the auto scan finishes.
» The first station in the preset list
broadcasts automatically.

Select a preset radio station

1
Press / to select a preset number.