Storage; Troubleshooting - Gravely 988100-GR1336FX, 988101-GR1536FX, 988102-GR1548FX, 988103-GR1548FL, 988104-GE1748FL, 988110-GR1332FX, 988112-GR1544FX, 988114-GR Owner's/Operator's Manual

Pro unit
Table of Contents

Advertisement

WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
Storage – Two Months or More
Check each item in the Maintenance Schedule on page
17, but do not add gasoline.
Clean the unit. Touch up all scratched painted surfaces.
IMPORTANT: Never spray unit with high-pressure
water or store unit outdoors. Store unit in a cool, dry,
protected location.
PROBLEM
PROBABLE CAUSE
Engine will not
1. Safety Interlock System is
start
2. Fuel tank is empty or fuel is
3. Air cleaner is clogged or
4. Safety Interlock System out of
5. Dirty or damaged spark plug.
Unit will not
1. Transmission belt or mower
move or mow
when the engine
is running
Changes in the
1. Loose or missing fasteners.
sound or
2. Mower blade problem.
vibrations of the
unit
3. Worn or damaged clutch.

STORAGE

TROUBLESHOOTING

preventing start.
contaminated.
damaged.
adjustment or defective.
belt is broken, worn, or off the
pulleys.
NOTE: Clean unit thoroughly with mild soap and low
pressure water and lubricate (see Maintenance). Touch
up all scratched painted surfaces. Do not allow gaso-
line or oil to remain on any decals.
Engine
Refer to the engine manual to prepare the engine for
storage.
Battery
Remove battery and store in a cool, dry place.
CORRECTION
1. The engine will not start unless the shift lever
is in neutral, the key is in the On position and
the Power Take Off (PTO) is Off (988100, 101,
102, 103, 104, 110, 112).
The engine will not start unless the key is in
the On position , and the Power Take Off
(PTO) is Off (988114, 115, 118, 119, 313) .
2. Add fuel. If necessary, replace the fuel with
clean, fresh fuel.
3. Clean or replace the filter element. See engine
manual.
4. See your Dealer for repairs.
5. See Engine Manual.
1. Check belts for wear, damage and correct
position on pulleys. Replace belts if worn or
damaged. See Replace Transmission Belt on
page 21.
1. Check all the fasteners. Replace if necessary.
2. Check blades for wear or damage. See Mower
Blades on page 24.
3. See your Dealer for repairs.
GB - 25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents