Table of Contents
Advertisement
DO NOT TIP battery beyond a 45° angle in any
direction.
ALWAYS keep batteries out of reach of children.
Before making any inspections, repairs, etc.:
disengage PTO, stop unit and engine, remove key,
allow moving parts to stop.
Allow hot parts to cool.
ALWAYS block wheels, engage parking brake and
know all jack stands are strong, secure and will hold
weight of unit during maintenance.
An extension spring, when extended, stores energy
and can be dangerous. Always use tools specifically
designed for installing or removing an extension spring.
Always compress or extend springs slowly.
ALWAYS maintain unit in safe operating condition.
Damaged or worn out muffler can cause fire or
explosion.
Keep hardware, especially blade attachment bolts,
tight.
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
1. Remove the unit from shipping container.
2. Adjust tire pressure to 8 to 16 psi (55 to 110 kPa).
3. Service and connect battery. See Charge Battery
on page 22 .
4. Check the adjustments outlined in Service &
Adjustments .
WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
CONTROLS AND FEATURES
Safety Interlock System
DANGER: SAFETY INTERLOCK SYSTEM
FAILURE and improper operation of unit can
result in death or serious injury. ALWAYS
know the safety interlock system is operating
properly. See Check Safety Interlock System
on page 17 for testing instructions.
The engine will only start with the PTO disengaged.
Pistol grip models must have the shift lever in neutral
for engine to start.
Maintain or replace safety and instruction labels, as
necessary.
For unit storage or extended storage:
• NEVER store with fuel in fuel tank, inside a
building where any ignition sources are present.
• Allow engine to cool completely.
Use only attachments or accessories designed for your
unit and that can be used safely on your terrain.
Check attachment components frequently for wear,
damage or deterioration. Replace with manufacturer's
recommended parts for safety.
To reduce fire hazard and overheating, keep equipment
free of grass, leaves, debris or excessive lubricants.
Use extra care with grass catchers and other
attachments. These can change the stability of the unit.
Use only approved hitch points.
ALWAYS be aware of attachments when turning.
ALWAYS allow adequate clearance between
attachments, personnel, and other objects.
ASSEMBLY
5. Check engine oil level. See engine manual.
6. Add clean fuel to the fuel tank. See engine
manual for type and grade.
7. Check for loose hardware.
8. Be sure that safety interlock system operates
correctly. See Check Safety Interlock System on
page 17.
9. Be sure that unit tracks straight.
Unit must not pull sharply to the left or right when
the steering levers are released. See Adjusting
the Unit to Track Straight on page 18.
OPERATION
Operator Presence Control (988100, 101, 102,
103, 104, 110, 112)
The operator presence control lever must be
depressed to operate the PTO or traction drive. When
the shift lever or PTO is engaged, releasing the
operator presence control lever stops the engine.
Operator Presence Control
(988114, 115, 118, 119, 313)
The operator presence control levers must be
depressed to operate the PTO. When the PTO is
engaged, releasing the operator presence control
levers stops the mower blades.
CAUTION: AVOID INJURY. Operate only
when operator presence control is
functioning correctly. See Check Safety
Interlock System on page 17 for testing
instructions.
GB - 10
Hide quick links:
Advertisement
Table of Contents
