Product Specifications - Cisco DPC2100 Datasheet

© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Cisco Model DPC2100 Back Panel (image may vary from actual product and specification)
Figure 3.
Back Panel Features
Table 2.
Feature Description
POWER Connects modem to the DC output of the AC power adapter
Color: Black
POWER SWITCH Turn on and off device (power switch provided on all products carrying the CE mark)
(not shown)
Color: Black
MAC ADDRESS LABEL Displays the MAC address of the cable modem
RESET Resets the cable modem
ETHERNET (1) RJ-45 Ethernet port connects to the Ethernet port on your PC or your home network
Connector Color: Yellow
USB (1) Type B USB 1.1 client port connects to a USB port on your PC
(optional on some part numbers)
Connector Color: Blue
CABLE F-connector connects to an active cable signal from your service provider
Connector Color: White

Product Specifications

Product Specifications
Table 3.
Specification Value
RF Downstream
Operating Frequency 88 to 930 MHz (H/W Revision 3.0)
Range
88 to 860 MHz (H/W Revision 2.1 and earlier)
Tuner Frequency Range 88 to 930 MHz (H/W Revision 3.0)
88 to 860 MHz (H/W Revision 2.1 and earlier)
Demodulation 64 QAM or 256 QAM
Maximum Data Rate 42.88 Mbps for 256 QAM and 30.34 Mbps for 64 QAM
Bandwidth 6 MHz
Operating Level Range -15 to +15 dBmV
Input Impedance 75 ohms
RF Upstream
Operating Frequency 5 to 42 MHz or 5 to 55 MHz
Range
Transmitter Frequency 5 to 42 MHz or 5 to 55 MHz
Range
Modulation QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM / ATDMA, 128 QAM / SCDMA
Data Sheet
Page 3 of 10