Administrator Settings—Sip Settings - Cisco Profile Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents Getting started
Administrator settings—SIP settings
The SIP settings pane lets you specify:
•
Your URI.
•
The Default transport layer, this can be set to TCP,
UDP, TLS or Auto.
•
The Proxy type can be set to Standard, Alcatel,
Avaya, Cisco, Microsoft, Nortel, Experimental,
Siemens.
The experimental setting is for testing purposes.
•
Outbound is not used in this version.
•
Proxy discovery can automatic or manual. In the
case of manual the proxy address must be specified
by you.
•
Login name and Password is required by the VCS.
Be sure to:
•
Tap Save to put settings into effect.
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls Using directories
39
In-call features Settings Settings
User guide
Contact us
www.cisco.com