Administrator Settings—Ip Settings For The Codec - Cisco Profile Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents Getting started
Administrator settings—IP settings for the codec
The IP settings pane for the Codec of the system lets
you specify whether to use IPv4 (below left) or IPv6
(below right).
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls Using directories
35
In-call features Settings Settings
If IPv4 assignment is specified to be
Auto, you must save your settings to
put changes into effect.
Remember to save your settings to
User guide
Contact us
put changes into effect.
www.cisco.com