Tool Bar - Q-See EasyView QN6401X User Manual

LIVE VIEWING
Simply tap on a camera from the list on the left in either the My Cameras or
Shared tab and then tap the Play button in the center of the View window.
Below it, the Status bar will show the strength of the camera's WiFi connection
and whether you are viewing live video or a playback. While you are watching the
video, you can choose to record a clip, take a screenshot or talk through the cam-
era. For the latter, your tablet must have a microphone. in order to avoid feedback
(that loud screeching that comes from speakers), the camera will stop recording
using its microphone while you are using its speaker. Remember to deselect Talk
in order to hear any response.
With shared cameras, you will only be able to record a video clip or take a screen-
shot. You will not be able to view saved video or motion events. Only the owner can
adjust the settings, including audio.
MOTION EVENTS
At the bottom right of the display is the Timeline with a Scale Adjustment Knob.
The Timeline will show any motion events as red balls. Multiple events will result in
a number in the ball.
PICTURE 5-16
Tapping on one of the motion event indicators will cause the still images to pop up.
Up to three images can be displayed at once, but you can scroll through the im-
ages to see all that have been recorded in that space of time. You can tap on one
of those images to open the Share window which is covered later in this section.
Use the Scale Adjustment Knob to search the Timeline for events. The eView
Cloud Servers will save stil images for 30 days. You can slide the Timeline itself
forward or backward to see a specific time period.
REPLAY
If you have inserted a Micro SD card inserted into the camera, you will be able to
record video for playback. If you have not put a card into your camera, attempt-
ing to use this feature will result in a message stating that an error has occurred
because the application believes that it simply unable to connect properly to the
34
camera to access it. Use the motion events as a guide to your search, but be
aware that while the event images are saved for 30 days, the largest size SD card
supported by the camera is 32GB and it can hold approximately 7 days' worth of
video. Older video is overwritten as the card is filled so you may see motion events
for video that no longer exists.
To start playing back recorded video, move the white playhead to the desired point
and then tap the Play button in the center of the View window. The status bar
below the window will display the start time.
To return to live view, simply tap on Now at the right of the Timeline.
SHARING VIDEO & IMAGES
The eView app is designed to allow
you to share any recorded video or still
images from your cameras with friends
and family via messaging, mail or
through social media. After you use the
Screenshot or Record buttons in ei-
ther Live or Playback mode, the Share
window will open. You can choose to
send the file directly to Facebook, Twit-
ter, Instagram (image only) or Weibo.
Tapping Other Share will allow you
to save the file to your tablet, or send it in a text or mail message. Once it's been
saved, you can use any other social media app on your tablet to share it to that
service. Tap Back to cancel sharing. The file will not be saved.

TOOL BAR

The Tool Bar is located below the list of cameras and is usually hidden. Tap on the
Arrow (>) to show the tools. You can use these to add, delete or share cameras,
along with adjusting the settings and their WiFi connection.
Add/Delete Cameras
Adding cameras was covered in Chapter 4. To delete a camera, simply tap on
the Minus (-) button and select the camera to delete. Tapping the Minus button
again will close this function.
IMPORTANT! A camera can only be registered to one owner at a time.
If you plan on giving your camera to someone else, you MUST remove
it from your account or it cannot be re-registered to a new account.
PICTURE 5-17
35