Grandstream Networks GXV3662 User Manual page 28

GXV3662 IP Camera
defined time period – the time schedule. The GXV3662 allows multiple alarm actions.
Record Video – If this option is
selected, the GXV3601 will record the
video when an alarm is triggered. You
can enter the length of the video
recording (in seconds). You can also
choose the storage method for video
files: SD card, USB Flash drive, or USB hard drive.
Voice Alarm to SIP Phone – If this option is selected, the GXV3601 will make calls to the
number listed in the Phone List page using the configured SIP account when an alarm is
triggered. To use this function, the settings in SIP page must be configured properly.
Alarm Output – If this option is selected, the alarm will output via the configured
method/equipment when it is triggered.
Upload to Alarm Center – This option is an integrated feature with GSurf. If this option is
checked, the GXV3601 will report the alarm event to GSurf.
Record Video and Upload to FTP server – If this option is selected, the GXV3601will record
the video and upload it to the FTP server when an alarm is triggered. You must check Record
Video and configure the FTP page properly to use this feature.
Email JPEG and Store it to USB drive or SD card – If this option is selected, the GXV3601
will capture the image and store it to connected live storage device when an alarm is
triggered.
Set up Alarm Event Time Schedule
This section allows you to configure the time during which the GXV3662 will monitor the
Alarm Input. The GXV3662 not only can monitor your settings but also can take actions when
the alarm is triggered.
Dropdown list for date Available time schedules
To add a schedule, select the date from the dropdown list, Start Time and End time and
Click Add to add a new time schedule.
To delete a schedule, check the schedule you would like to remove and click Delete.
Firmware 1.0.1.22 Page 28 of 36
Grandstream Networks, Inc. 03/2011