Grandstream Networks Grandstream HandyTone HandyTone-488 User Manual page 17

HandyTone-488 User Manual
NAT/DHCP Server Information & Configuration:
Cloned WAN MAC
Addr:
LAN Subnet Mask:
LAN DHCP Base
IP:
DHCP IP Lease
Time:
DMZ IP:
Port Forwarding:
End User
Password
IP Address
255.255.255.0
192.168.2.1
120
(in units of hours, default is 120 hours or 5 days)
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
0
WAN port LAN IP
All Rights Reserved Grandstream Networks, Inc. 2004
This contains the password to access the Web Configuration Menu.
This field is case sensitive.
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP
mode are not used (even though they are still saved in the Flash
memory.) The HandyTone ATA will acquire its IP address from the
first DHCP server it discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be
set. The HandyTone will attempt to establish a PPPoE session if any
of the PPPoE fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask,
Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary) fields will need to be configured. These fields are reset to
zero by default.
(in hex format)
(default is 255.255.255.0)
(base IP for the LAN port, default is 192.168.2.1)
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
LAN port
Update
17
Grandstream Networks, Inc.
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol
0 " UDP Only"
Protocol