Targus UNIVERSAL LAPTOP DOCKING STATION User Manual page 8

Targus Universal Laptop Docking Station
Connecting a PS/2 Mouse / Keyboard
To connect a PS/2 mouse or keyboard, attach the cable
connector to the PS/2 port on the docking station.
Connecting and Configuring a Serial Modem
To connect a serial modem:
1 Attach the cable connector to the serial port on the docking
station.
2 Install the modem software driver according to the instructions
that come with the device.
3 When prompted to select the port, choose the Serial USB
(COMx), where x is the COM port number assigned by your
operating system.
Connecting a Parallel Printer
To connect a parallel printer:
1 Attach the cable connector to the parallel port on the docking
station.
2 Go to Start button of your Window OS, and click on Printers
and Faxes. Add your printer driver by following the instructions
of the Add Printer Wizard.
14
Targus Universal Laptop Docking Station
Connecting a PDA
1 Attach the cable connector to the serial port on the docking
station.
2 Verify that the COM port setting, in either your HotSync® or
ActiveSync® software, matches the setting on the docking
station.
To verify the COM port setting on the docking station, refer to
"Verifying Devices are Installed".
To verify the COM port setting on your PDA, refer to the
documentation that came with it.
Connecting to a Local Area Network
To connect an Ethernet cable with an RJ-45 connector, attach
the cable connector to the Ethernet/network port on the docking
station. Additional procedures to connect to an actual network
depend on the type of network you are using. Contact your
network administrator for detailed instructions.
15