Glass Assembly; Screen Mesh; Grilles And Trim; Hood - Quadra-Fire QV32B-A Owner's Manual

F. Glass Assembly
WARNING
Handle glass doors with care.
• Inspect the gasket to ensure it is undamaged.
• Inspect the glass for cracks, chips or scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass door removed,
cracked, broken or scratched.
• Replace glass door assembly as a complete appliance.
Removing Glass Assembly
Pull the four glass assembly latches out of the groove on
the glass frame. Remove glass door from the appliance
(see Figure 12.14).
Replacing Glass Assembly
Replace the glass door on the appliance. Pull out and
latch the four glass assembly latches into the groove on
the glass frame.
LATCHES
(BOTH BOTTOM
AND TOP)
GLASS
ASSEMBLY
Figure 12.14 Glass Assembly
48 Quadra-Fire • QV32B-A, QV36B-A • 2014-900 Rev. J • 7/08
G. Screen Mesh
The screen mesh is shipped with the front/door.
H. Grilles and Trim
Install optional marble and brass trim surround kits as de-
sired. Marble, brass, brick, tile, or other noncombustible
materials can be used to cover up the gap between the
sheet rock and the appliance.
Do not obstruct or modify the air inlet/outlet grilles. When
overlapping on both sides, leave enough space so that the
bottom grille can be lowered and the trim door removed.
I. Hood
The hood is shipped with the front/door.
J. Air Shutter Setting
QV32B-A 1/16 in.
QV36B-A 1/16 in.
NG LP
3/8 in.
3/8 in.