Scrambler Function; Emergency Transmission; Stun Function; Priority A Channel Selection - Icom iF5061D Instruction Manual

2
BASIC OPERATION

■ Scrambler function

The voice scrambler function provides private communica-
tion between stations. All versions have a built-in frequency
inversion type scrambler; however, an optional rolling or non-
rolling type is available as well.
q Push [Scrambler] to turn the scrambler function ON.
• " " (Scrambler indicator) appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
• " " disappears.

■ Emergency transmission

When [Emergency] is pushed for the specified time period,
an emergency signal is automatically transmitted. (p. 6)
When [Emergency] is pushed for the specified time period,
the DTMF or 5-tone* emergency signal is transmitted once
or repeatedly on the emergency channel. However, when no
emergency channel is specified, the signal is transmitted on
the previously selected channel.
If you want to cancel the emergency call, push and hold the
key again before transmitting the call.
* Depending on the operating model type.
13

■ Stun function

When the specified ID, set as a kill ID, is received, the stun
function is activated.
When the kill ID is received, the transceiver switches to the
password required condition. Entering of the password (p. 8)
is necessary to operate the transceiver again in this case.

■ Priority A channel selection

When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
• Turning the power ON
The Priority A channel is selected each time the transceiver
power is turned ON.
• Status call
The Priority A channel is selected when transmitting a sta-
tus call. (BIIS operation only)
• Off hook.
The Priority A channel is selected when the microhone is
took off from its hanger.