Changing Default Input Presets; Confi Gure Video; Assigning Video Inputs; Setting The Main Video Input - Krell Industries EVOLUTION 707 Owner's Reference Manual

Main Menu, Navigation and Setup Cont...
2.
3.

Changing default input presets.

There are (10) preset buttons on the Evolution 707 labeled: DVD, DVDR, SAT, VCR, TV, CD, TUNER,
DVR, GAME and TAPE. All the assigned inputs can be tailored to accommodate audio and video
combinations from multiple sources. Every Input has a selectable video, audio and trigger
component that can be arranged to accommodate any number of source combinations. Refer to the
default setting chart on page 23 for quick connection information.
Confi gure Video
A. Assigning Video Inputs – There are two settings available for each button, A main or primary
video input and a Zone 2 video input. The second zone video is designed for analog video
only. If a second zone video output is required, select a second zone video input in addition
to the Main video input. The Evolution 707 cannot pass HDMI information to the analog
video outputs. When Zone 2 video is required a second analog video input connection is
necessary.
1.

Setting the Main Video Input

Using the arrow keys navigate to the text below the "device" label. Press the enter
button to make the text fl ash, while fl ashing and using the up and down arrows,
select the device input to be changed by pressing the enter button. Navigate to the
text below the "Main Video Input" label and press Enter, this will make the text fl ash
and allow scrolling to the required input type.
Main video input device options are:
a. HDMI 1, HDMI 2, HDMI 3, HDMI 4
b. COMPONENT 1, COMPONENT 1, COMPONENT 3
c. SVIDEO 1, SVIDEO 2, SVIDEO 3, SVIDEO 4
d. COMPOSITE 1, COMPOSITE 2, COMPOSITE 3
e. PREVIOUS - Displays the last active video input selected.
f. MENU ONLY - Displays only the OSD and menu, no other video will be passed.
g. DISABLED - No OSD or video will be passed.
2.

Setting the Zone 2 Video input

Using the arrow keys navigate to the text below the device label "Zone 2 video input".
Press the enter button to make the text fl ash, while fl ashing and using the up and
down arrows, select the device input to be changed by pressing the enter button.