Accessories - Graco Hydra-Clean 308-530 Instructions-Parts List Manual

ACCESSORIES

(Must be purchased separately)
DOWNSTREAM CHEMICAL INJECTOR KIT
800–117 & 800–649
For injecting harsh cleaning chemicals downstream from
the pump. 800–649 is stainless steel construction.
UPSTREAM CHEMICAL INJECTOR KIT
800–257
For injecting mild cleaning chemicals upstream into the
pump.
BACKFLOW PREVENTOR 801–133
Prevent back–up of contaminated water into fresh
supply. Install upstream of pump.
308–530
ANTI–FREEZE FLUSH KIT 802–327
For flushing system with 50% anti–freeze solution prior to
transporting or storing pressure washer in below freezing
temperatures.
INLET PRESSURE REGULATOR 800–258
Regulates inlet water pressure to 60 psi (4 bar)
maximum.
WATER SANDBLASTING KIT 800–120
For abrasive cleaning of stubborn dirt and paint.
Requires a spray tip which is not included in kit (2040
uses 801–729, 2540 uses 801–667).