Blaupunkt Monte Carlo MP34 Operating And Installation Manual page 21

➮
To display the time, briefly press
button 6.
the
➮
To set the time, press the MENU
button 8.
➮
Keep pressing the fi or % button
7 until "CLOCK SET" appears in
the display.
➮
Press the # button 7.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮
Adjust the minutes using the %fi
buttons 7.
➮
Once you have set the minutes,
press the @ button 7. The hours
start flashing.
➮
Adjust the hours using the %fi
buttons 7.
When you have finished making your
changes,
➮
press the MENU button 8 twice.
➮
Press the MENU button 8.
➮
Keep pressing the % or fi button
7 until "12H MODE" or "24H
MODE" appears in the display.
➮
Press the @ or # button 7 to
switch between the modes.
When you have finished making your
changes,
➮
press the MENU button 8.
"CLOCK ON" setting in the menu allows
you to display the time when the unit is
off and the vehicle ignition is on,
➮
press the MENU button 8.
➮
Keep pressing the fi or % button
7 until "CLOCK OFF" or "CLOCK
ON" appears in the display.
➮
Press the @ or # button 7 to
switch between the ON/OFF
settings.
When you have finished making your
changes,
➮
press the MENU button 8.
To briefly display the time when the unit
is off,
➮
button 6.
press the
The time is displayed for eight seconds.
21