Touch Control Panel - Hotpoint AQUALTIS AQ9D 692 U Instructions For Installation And Use Manual

Touch control panel

WASH CYCLE
SELECTOR
knob
ON/OFF
Button with
indicator light
Button with ON/OFF indicator light: press this briefly
to switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off the
washing machine during the wash cycle, press and hold the
button for approximately 3 seconds; if the button is pressed
briefly or accidentally the machine will not switch off. If the
machine is switched off during a wash cycle, this wash cycle
will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in either
direction. To select the most suitable wash cycle, please refer
to the "Table of wash cycles".
The knob will not move during the wash cycle.
M1-M2-M3 buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the memory
of the machine. To recall a previously-stored cycle, press the
corresponding button.
button: press to modify or exclude the
TEMPERATURE
temperature setting; the value selected will appear on the
display above (see "Running a wash cycle").
SPIN SPEED CYCLE
the spin cycle; the value selected will appear on the display
above (see "Running a wash cycle").
DELAY TIMER button: press to set a delayed start for
the selected wash cycle; the set delay time will appear on the
display above (see "Running a wash cycle").
OPTION buttons with indicator lights: press to select the
available options. The indicator light corresponding to the
selected option will remain lit (see "Running a wash cycle").
WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash
– Drain ). The text lights up when the cycle is complete.
START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the button
M2 M1
M3
button: press to modify or exclude
– Rinse – Spin
SPIN SPEED
button
TEMPERATURE
button
DISPLAY
OPTION
DELAY
buttons
TIMER
button
again; the indicator light will flash in an orange colour. If the
"Door locked"
be opened. To start the wash cycle from the point at which it
was interrupted, press the button again.
DOOR LOCKED
porthole door is locked. To open the door, pause the wash
cycle (see "Running a wash cycle").
CHILD LOCK
or deactivate the control panel lock, press and hold the
button for approximately 2 seconds. when the indicator
light is illuminated, the control panel is locked. This means
it is possible to prevent wash cycles from being modified
accidentally, especially where there are children in the home.
ECO indicator light: the
the washing parameters, an energy saving of at least 10%
is made. Furthermore, before the machine enters "Standby"
mode, the icon will light up for a few seconds; when the
machine is switched off the estimated energy saving will be
around the 80% mark.
CHANGE LANGUAGE
The first time the machine is switched on, the first language
will flash on the display. The " ", "OK" and "V" symbols will
appear on the display, in line with the 3 buttons on the right-
hand side. The languages change automatically every 3";
alternatively, they can be changed by pressing the buttons next
to the " " and "V" symbols. Use the "OK" button to confirm the
language, which will be set after 2". If no buttons are pressed,
the automatic language change will begin again after 30".
The language may only be changed while the machine is
switched off. Press and hold the temperature
+delayed start
the set language flashes on the display. Press the buttons
next to the " " and "V" symbols to change the language. Use
the button next to the "OK" symbol to confirm the language,
which will be set after 2". If no buttons are pressed, the
language set previously will be displayed after 30".
Switch on the machine.
START/PAUSE
button
with indicator light
WASH
CYCLE
ECO
PHASE
indicator light
icons
CHILD LOCK
with indicator light
DOOR LOCKED
indicator light
indicator light is switched off, the door may
indicator light: indicates that the
button with indicator light: to activate
icon lights up when, after altering
buttons for 5''; a short beep sounds and
EN
button
+spin
7