Touch Control Panel - Hotpoint Aqualtis AQ113DA 697 I Instructions For Installation And Use Manual

Touch control panel

WASH CYCLE
SELECTOR
knob
ON/OFF
Button with
indicator light
Button with ON/OFF indicator light: press this briefly
to switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off the
washing machine during the wash cycle, press and hold the
button for approximately 3 seconds; if the button is pressed
briefly or accidentally the machine will not switch off. If the
machine is switched off during a wash cycle, this wash cycle
will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in either
direction. To select the most suitable wash cycle, please refer
to the "Table of wash cycles".
The knob will not move during the wash cycle.
M1-M2-M3 buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the memory
of the machine. To recall a previously-stored cycle, press the
corresponding button.
button: press to modify or exclude the
TEMPERATURE
temperature setting; the value selected will appear on the
display above (see "Running a wash cycle").
button: press to modify or exclude the spin
SPIN CYCLE
cycle; the value selected will appear on the display above (see
"Running a wash cycle").
DELAYED START button: press to set a delayed start for
the selected wash cycle; the set delay time will appear on the
display above (see "Running a wash cycle").
OPTION buttons: press to select the available options. The
indicator light corresponding to the selected option will remain
lit (see "Running a wash cycle").
WASH CYCLE PHASE icons: these illuminate to indicate the
progress of the wash cycle (Wash
Drain ). The text lights up when the cycle is complete.
START/PAUSE button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
M1
M2
DISPLAY
M3
– Rinse – Spin
SPIN
button
TEMPERATURE
button
OPTION
DELAYED START
buttons
button
lit in a fixed manner. To pause the wash cycle, press the
button again; the indicator light will flash in an orange colour. If
the "LOCK" indicator light is switched off, the door may be
opened. To start the wash cycle from the point at which it was
interrupted, press the button again.
LOCK indicator light: indicates that the porthole door is
locked. To open the door, pause the wash cycle (see "Running
a wash cycle").
CHILD LOCK
or deactivate the CHILD LOCK, press and hold the button
for approximately 2 seconds. when the indicator light is
illuminated, the control panel is locked
ON/OFF button) . This means it is possible to prevent wash
cycles from being modified accidentally, especially where there
are children in the home.
ECO indicator light: the
the washing parameters, an energy saving of at least 10%
is made. Furthermore, before the machine enters "Standby"
mode, the icon will light up for a few seconds; when the
machine is switched off the estimated energy saving will be
around the 80% mark.
–
START/PAUSE
with indicator light
ECO
indicator light
CHILD LOCK
with indicator light
LOCK
indicator light
button with indicator light: to activate
(apart from the
icon lights up when, after altering
button
EN
WASH
CYCLE
PHASE
icons
button
9 9