Check For Fluid Leakage - Graco PRO 224-094 Instructions Manual

Check for Fluid Leakage (See Fig 10 )
WARNING
If any fluid leakage from the gun is detected,
stop spraying IMMEDIATELY! Fluid leakage into
the gun shroud could cause fire or explosion and
result in serious bodily injury and property damage.
0437
Fig
10
MAINTENANCE
Fabric Cover
Check for signs
of fluid leakage
where indicated
by arrows
Exhaust Tubes
During operation, periodically check the two manifold ex-
haust tubes and both ends of the gun shroud for the pres-
ence of fluid. Fluid in these areas would indicate fluid
leakage into the shroud.
If fluid is seen in any of these areas, stop spraying
immediately! Follow the Pressure Relief Procedure on
page 9, then remove the gun for repair.
Gun Shroud
0438