Part Number And Serial Number; Model Name And Bios Version - AOpen AX3S Easy Installation Manual

Motherboard

Hide thumbs Also See for AX3S:

Manual (116 pages)

Table of Contents

If you encounter any trouble to boot you system, follow the

procedures accordingly to resolve the problem.

Start

Turn off the power and unplug the AC power cable, then remove all

of the addon cards and cables, including VGA, IDE, FDD, COM1,

COM2 and Printer.

Make sure if the jumper settings for CPU and DRAMs are correct.

Clear CMOS.

Install the VGA card. Then connect your monitor and keyboard.

Turn on the power, and check if

the power supply and CPU fan

work properly.

Yes

Check if there is display.

Yes

Press Ctrl, and Alt key at the

same time, hold them and then

press Del to see if the

system reboots.

Yes

During system rebooting, press Del to enter BIOS Setup. Choose

"Load Setup Default".

Turn off the system and

re-connect the IDE cable.

Check if the system can

reboot successfully.

Yes

Re-install Windows 95, Windows 98 or Windows NT.

End

The problem was probably caused

by power supply or motherboard

failure. Please contact your reseller

or local distributor for repairing.

Perhaps your VGA card or monitor

is defective.

It is very possible that your keyboard

is defective.

The problem should be caused by the

IDE cables or HDD itself.