Table of Contents
Advertisement
14. Die Hard BIOS II
Recently, many viruses have been found that they may destroy bios code and data area.
Therefore, this motherboard implements a very effective hardware protection method that
does not involve any software or BIOS coding, hence it is 100% virus free. You may restore
the originally mounted BIOS with BIOS 2 by setting JP24 to pin 2-3 if it fails to act normally.
JP25
Pin 1
1
1
Boot from
Boot from
BIOS1(default)
BIOS2
JP24
1
1
Protect
Not protect
BIOS2(default)
BIOS2
JP25
BIOS 2(Rescue ROM)
15. Power-on and Load BIOS Setup
After you finish the setting of jumpers and connect correct cables. Power on
and enter the BIOS Setup, press <Del> during POST (Power On Self Test).
Del
Choose "Load Setup Defaults" for recommended optimal performance.
JP24
Pin 1
BIOS1
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your
system
components
SDRAM, HDD, etc.) are good enough for
turbo setting.
16. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name.
17. BIOS Upgrade under Windows Environment
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it's STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1.
Download the new version of BIOS package
http://english.aopen.com.tw
2.
Unzip the download BIOS package (ex: WAK79GTube102.ZIP) with WinZip
(
http://www.winzip.com
3.
Save the unzipped files into a folder, for example, WAK79GTube102.EXE &
WAK79GTube102.BIN.
4.
Double click on the WAK79GTube102.EXE, EzWinFlash will detect the model name
and BIOS version of your motherboard. If you had got the wrong BIOS, you will not
be allowed to proceed with the flash steps.
5.
You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
6.
EzWinFlash will complete all the process automatically, and a dialogue box will pop
up to ask you to restart Windows. You may click [YES] to reboot Windows.
7.
Press <Del> at POST to
"Save & Exit Setup". Done!
It is strongly recommended NOT to turn off the power or run any application during
(CPU,
FLASH PROCESS.
zip
file from AOpen official web site. (ex:
)
) in Windows environment.
enter BIOS setup
, choose "Load Setup Defaults", then
Advertisement
Table of Contents
