Table of Contents
Advertisement
Play vs. Edit
Play
Once in Performance Mode, plug in your instrument and it powers up into Play.
In Play, Volume, Blend and Phase can be adjusted. The chromatic Tuner and the
automatic Anti-Feedback circuit can also be activated. The Tone control is now
referred to as the Edit knob.
Edit
Press and release the Edit knob to enter Edit; the tuner's green in-tune LED will
light solid. Once in Edit, press the Edit knob repeatedly to step through the
parameters. Each parameter is displayed using a single letter to represent its
function (see page 19). Adjust its value by turning the Edit knob. A number is
displayed and the tuner's sharp/fl at lights show positive or negative values.
Note: F1 Aura + is programmable and automatically saves your settings.
To exit Edit and return to Play, wait 15 seconds for the display to go dark, or press
+ hold the Edit knob for 2 seconds. You may also immediately exit by simultane-
ously pressing both the Edit and Volume knobs.
9
Hide quick links:
Advertisement
Table of Contents
