Aux Operations - Clarion M502 Owner's Manual & Installation Manual

iPod & iPhone Operations
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your iPod/
iPhone repeatedly.
1. Press the [RPT] button on the remote
control once or more until "RPT ON"
appears on the LCD to perform repeat play.
2. Press [RPT] button on the remote control
repeatedly until "RPT OFF" appears on the
LCD to cancel repeat playback.
Random play
This function allows you to play all tracks in a
random order.
1. Press the [RDM] button on the remote
control once or more until "RDM ALBUM"
appears on the LCD for album random play.
2. Press the [RDM] button on the remote
control once or more until "RDM SONG"
appears on the LCD to perform random
play.
3. Press the [RDM] button on the remote
control once or more until "RDM OFF"
appears on the LCD to cancel random
playback.
Setting iPod simple control mode
Use this function if you wish to operate
through your iPod connected to this unit via
the USB cable.
* The factory default setting is " OFF ".
1. Press and hold [CONTROL] knob (center),
and rotate the [CONTROL] knob choose
ADJUST, then press the [CONTROL] knob
(center) to enter system setup.
2 Press the [CONTROL] knob (left / right) to
select " S-CTRL".
3. Rotate the [CONTROL] knob to select "
ON " or " OFF " .
• ON: Operations are made through your
iPod.
• OFF: Operations cannot be made through
your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
12
M502
slowly. If repetitive operations are performed
too quickly, unforeseen errors may occur.
• When performing iPod operations using
simple control mode, please do not operate
the iPod and the unit at the same time,
otherwise there may be unexpected event
happened.
• Some iPod models do not support this
function. Consult your nearest Clarion dealer
or website to confirm which models do not
support this function.
iPod menu alphabet search
This function searches the subfolders for desired
alphabetical letters.
1. Press the [CONTROL] knob (up), and rotate
[CONTROL] knob to select the iPod menu
mode.
2. Rotate the [CONTROL] knob to switch
between categories.
MUSIC: PLAYLISTS, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS, TV
SHOWS VIDEO PODCASTS, RENTALS
3. Press the [CONTROL] knob. (The contents of
the category are displayed.)
4. Press and hold the [CONTROL] knob (down).
5. Rotate the [CONTROL] knob to select the
desired letter to search.
6. Press the [CONTROL] knob (down) to
perform search.
7. Roted the [CONTROL] knob to select and
press the [CONTROL] knob to confirm.
Listening to PANDORA
You can listen to Pandora internet radio by
connecting an iPod/iPhone that has Pandora
Application already installed.
To start streaming, connect the iPod/iPhone with
Pandora already launched.
When the unit displays "PLEASE LAUNCH
P A N D O R A A P P L I C A T I O N O N M O B I L E
DEVICE" in PANDORA mode, please launch the
PANDORA Application by operating the iPod/
iPhone connected.
iPod & iPhone Operations
1. Press the [CONTROL] knob (push) to
enter the Pandora mode.
Selecting a station from list
Press the [CONTROL] knob (up) to enter the
station list.
Rotate the [CONTROL] knob to select "BY
DATE" or "A-Z" and press the [CONTROL]
knob to confirm.
• BY DATE: List in an created date order
• A-Z: List in an alphabetical order
Go to next station or previous station(an
alphabetical order)
Press the [CONTROL] knob (right) on the
panel or [ ] button on the remote control to
go to next station.
Press the [CONTROL] knob (lift) on the panel
or [ ] button on the panel or remote control
to go to previous station.
Thumbs up/down
1. Press the [RDM] button on the remote
control for the thumbs up.
2. Press the [SCN] button on the remote
control for the thumbs down.
Notes:
• You can personalize your stations by
"thumbs up" or "thumbs down".
• Pandora limits the number of thumbs down
allowed on their service.
If you attempt to thumbs down songs
beyond the limit, the current song continues
to playback.

AUX Operations

Press the [CONTROL] knob on the panel or
[SRC/ ] button on the remote control once or
more to select "AUX".
AUX is just for audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel on the right of USB slot.
AUX Input sensitivity setting
1. Press and hold the [CONTROL] knob .
BOOKMARK artist or song
Press the [RPT ] buton on the remote control to
Bookmark artist.
Prsee and hold the [RPT ] button on the remote
control to Bookmark current artist of the song.
Creating new stations
Press the [1] button on the remote control to create
a new station from the current artist.
Press and hold the [1] button on the remote control
to create a new track.
Note:
If the name of the station you wish to create for
a track title or an artist name is the same as the
station name currently playing, "NOW PLAY"
appears on the display and the station will not be
created.
Skip
Press the [BAND/TOP] button on the remote
control for the next song in station.
Note:
• Pandora limits the number of skips allowed
on their service. If you attempt to skip songs
beyond the limit, "SKIP LIMIT" is displayed.
Play/Pause
Press the [CONTROL] knob (down) on the panel
or press [ ] button on the remote control.
2. Turn the [CONTROL] knob to select "AUX
SENS".
3. If the output level of connected external audio
player is "HIGH", rotate the [CONTROL] knob
and choose "LOW". And if the output level is
"LOW", choose "HIGH".