Insert The Batteries; Making The Remote Work With The Receiver - Dish Network BASIC REMOTE Manual

Insert the Batteries

1
2
3
Making the Remote Work
with the Receiver
1
2
Remove the remote
battery cover.
Insert 4 AA batteries,
making sure to match the
plus (+) ends with the plus
markings on the battery
case.
Replace the remote
battery cover. With the
cover at a slight angle,
line up the tabs and push
down on the cover until it
is in place.
Press the POWER button
on the receiver's front
panel.
Confirm remote operates
the receiver by pressing
other remote buttons.
3