Graco 3A0243A Repair Manual page 20

Clutch Housing
Removal
NOTE: All service to the engine must be performed by
an authorized Honda dealer.
1. Remove Pinion Assembly/Clutch Arma-
ture/Clamp and Clutch Housing, as instructed on
pages 17, and 18.
2. Disconnect all necessary wiring.
3. Remove two locknuts (17) and screws (16) from
base of engine.
4. Lift engine carefully and place on work bench.
1
To the field
2
To the engine
3
To gallon counter
3
4
To ground
Bottom View
3900
Green
2 4
20
Engine
1
ti5485b
Bottom View
5900/7900
2
16
17
Installation
1. Lift engine carefully and place on cart.
2. Install two screws (16) in base of engine and secure
with lock nuts (17). Torque to 26 ft-lb (22.6 N·m).
3. Connect all necessary wiring.
4. Install Pinion Assembly/Clutch Armature/Clamp
and Clutch Housing, as instructed on pages 17,
and 18.
ti5487a
3A0243A